If Your Hot Water System Suddenly Stops Working: What to Do
If Your Hot Water System Suddenly Stops Working: What to Do
Blog Article
What're your thoughts and feelings about Hot Water Heater Repair?
Several modern-day residences use an electrical hot water heater for their heating unit, because of its comfort as well as simplicity of use. However, just like any other electrical devices, issues might arise with its use, unexpectedly. It can be truly frustrating to awaken to a chilly shower as opposed to a hot one or having your bath with water that isn't warm enough or perhaps as well hot. Whatever the instance might be, hot water heater issues can be rather nerve-racking. Thankfully, we have actually made a listing of feasible services to your hot water heater issues. There are a number of factors that can create many of these issues, it could be a problem with the power supply, the electrical burner, or the thermostat. Prior to doing anything, ensure you shut off the main power supply for safety and security. Whatever the trouble is, getting it taken care of should not pose excessive of an issue if you adhere to these actions:
Check Your Power Supply:
As basic as this might seem, it is really necessary. Without adequate power, your water heater will not operate. So the first thing to do when your water unexpectedly stops working is to confirm that it isn't a power issue. Check if the fuse is burnt out or the circuit breaker stumbled. If the circuit breaker is the problem, just turn it on and off once more. Replace any kind of broken or damaged fuse. Examine the device with power after these adjustments to see if it's now functioning.
Inspect the Burner in the Water Heater:
If it's not a power problem, after that try having a look at your heating element if it is still functioning. Test each of your burner to be sure the issue isn't with any one of them. If any one of them is defective, change that part and after that inspect whether the hot water is back on.
Check Your Thermostat:
If your water heater still isn't functioning or the water appearing isn't warm enough, you might require to check the temperature setups on your top thermostat. Guarantee the breaker is switched off before doing anything. Open up the gain access to panel and press the red button for temperature reset above the thermostat. This should assist heat the water. Transform the breaker back on and also check if the problem has been solved.
Call A Specialist:
If after replacing all defective parts as well as resetting your temperature level, the hot water heater still isn't functioning, you might need to contact an expert plumber for a professional point of view. The problem with your heating unit could be that the hot and cold taps have been changed or it may be undersized for the quantity of hot water needed in your house. Whatever the instance might be, a specialist plumber would help fix the trouble.
Conclusion
Water heater problems are not always major. A lot of them are because of minor issues like a blown fuse or damaged burner. Replacing the malfunctioning parts ought to do the trick. However, if you are still unable to solve the trouble, give a call to your closest plumber to come to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed reading our excerpt on How to Troubleshoot and Repair an Electric Water Heater. Thanks for taking the time to read through our piece. Are you aware of another person who is enthusiastic about the subject? Be sure share it. Thank-you for going through it.
Best in emergency plumbing services. Report this page